• How to Use a Jointer | Woodworking

    Watch more Learn Woodworking videos: http://www.howcast.com/videos/500358-How-to-Use-a-Jointer-Woodworking Step 1: What is a jointer? Understand what a jointer is: a machine for leveling off pieces of rough wood. Step 2: Locate the high corners Determine the high corners of the planks and mark them--these are the points where you will apply the most pressure to level them out. Tip Use a push pad to apply pressure to the front of the plank and a push stick to apply pressure to the back and to guide the plank along. Step 3: Checking the height difference Before cutting, make sure the difference between the two table heights is where you want it. Also, the fence should be at 90 degrees. Lock all adjustments in place. Repeat the same process with the edges and use an engineer’s square ...

    published: 14 Mar 2013
  • S. W. Donnelly Joinery - Cowboy or Tradesman? You Decide.

    S.W. Donnelly Joinery - Nercwys, Mold. Found on http://www.findatrade.com. Note, Website do not vet adds! Fraudster or Professional? Note, refunded less than half of his charge & will not issue a receipt.

    published: 03 Apr 2014
  • cowboy builder from hell

    This was the work done by Graham Currie and Co. It was a complete and utter mess nothing was right. It was described by one joiner as the worst he had seen in 30 years. It was also condemed by West Lothian Council aho said it was a death trap.

    published: 13 May 2010
  • Limmy's Vines: The Plasterer

    LIMMY'S VINES, the UK & Ireland tour. Tickets on sale NOW. http://bit.ly/limmysvines All your favs on the silver screen, introduced by me, with a big Q&A at the end. See ye there!

    published: 30 Jan 2014
  • Australia Permanent Residence for TRADE occupations

    This video is about some of the trade occupations such as Air conditioning and fridge mechanics, Automotive Electricians, Boat Builders and Shipwrights, Brick layer and stonemason, Cabinet Maker, Carpenter and Joiner, Chef, Child Care Centre Managers, Electrical Engineering Technician, Electricians, Electronics Trades Workers, Glaziers, Horse Trainer, Locksmith, Metal Fitters And Machinists, Motor Mechanics, Painting Trades Workers, Panel Beaters, Plasterers, Plumbers, Radio Communication Technicians,Sheetmetal Trades Workers, Structural Steel And Welding Trades Workers, Technical Cable Jointer, Wall and Floor Tiler which are currently eligibile for a General Skilled Migration especially the 189 visa and also the 190 and 489 Australian Visas. The information in this video is current as o...

    published: 08 Jul 2017
  • Go to Work With a Tradesman

    Here's a short one on my day job. This is footage from this past Saturday and one of the reasons for lack of progress over the weekend. Hope you folks enjoy.

    published: 31 Oct 2017
  • Making table extensions for a 6 inch jointer

    This was the process I came up with to add extensions to my 6 inch jointer using metal plates. It really helped to joint long boards that otherwise are difficult to do on a 6" jointer. I added them to a 1990s model Jet jointer that I picked up for $150 and refurbished. Thank you for watching, Aaron Weed

    published: 03 Dec 2015
  • The Worlds Campest Tradesmen...

    published: 14 Jun 2017
  • Carpenters toolbox

    This is a copy of the toolbox I made 40 odd years ago as an apprentice joiner. It's not an exact copy as I made a few improvements and dumbed it down from the original as I didn't bother this time with dovetail joints etc.

    published: 06 Mar 2017
  • Cantrell Construction Festool Domino Joiners

    Versatile Products (BOP) Ltd http://www.versatileproducts.co.nz/ For all your paint & equipment needs Looking for paint, abrasives, sprayguns, airbrushes, compressors and tools for your boat, car, tractor, machinery, furniture, kitchen or hobby? You've come to the right place. Tradesman, Home Handyman, Hobbiest - we have the specialised tools, paint and equipment you need to get the job done right. We have over 3,000 quality products, so it is taking time to get them all onto our website. If your desired product isn't listed here, give us a call and our expert team will be able to help.

    published: 18 Sep 2014
  • Joiner Birmingham

    Need a Birmingham Joiner? http://www.bestlocaltradesmen.com/ How it works 1. Post your job for free 2. Get up to three quotes 3. Review ratings to select your tradesman 4. Rate your tradesman to help others More than 2 million jobs posted. So if you need a Birmingham Joiner visit http://www.bestlocaltradesmen.com/

    published: 17 Mar 2014
  • KD Joinery - Carpenters & Joiners in Motherwell

    KD JOINERY is a family run joinery and carpentry business based in Motherwell serving the Lanarkshire and Glasgow area with the highest quality and standards of joinery and carpentry from fully qualified tradesmen. They undertake every aspect of the joinery trade from small one off maintenance and repair jobs to entire new builds, renovations or convertions. http://www.touchmotherwell.com/business/list/bid/6766290

    published: 31 Mar 2010
  • TradeZapp | Social Network *Exclusively* for Tradesmen

    Plumbers, Electricians, joiners, carpenters, builders, roofers... all of these and more make up the TradeZapp community, so you can be sure that whatever your trade, you'll always be connected to the right trade. Download TradeZapp for FREE on your App Store today 

    published: 05 Jun 2017
  • How to on Wood Works 25, Joinery, Part 1

    http://builderssites.com/ Are you a tradesman who would like a new website that will help you find work locally? Do you want to have your customer reviews online so new customers don’t think twice about hiring you? Do you want somewhere to display all your work photos so your customer can see the high quality of your workmanship? We have packages to suit every type of tradesman both big and small. We can also give your 10% of your choice with promo code BUILDERS10 http://builderssites.com/ We have also handpicked a great selection of power tools from amazon that will that will help you get the job done quicker Combo Kits http://amzn.to/2kOtZgz Drill Drivers http://amzn.to/2lk541f Circular Saws http://amzn.to/2kDkApQ Table Saws http://amzn.to/2ljJIky...

    published: 09 Feb 2017
  • Intro to Planer/Jointer

    Basic intro to how to square boards on a planer / jointer

    published: 29 Dec 2011
  • Joinery Depot, Joiner in Hull & Grimsby

    For more information go to: http://www.hulldailymail.co.uk/tradesmen/kitchen-design-and-installation/joinery-depot/business-21747665-detail/business.html

    published: 02 Sep 2014
  • LOCAL JOINERY IN CAERPHILLY - BUILDER & JOINER IN CAERPHILLY

    Welcome to Your Local Carpentry - Joinery - Building Services Latest project supply & install new hardwood staircase in Caerphilly South Wales We are a well-established Building & Joinery firm in Caerphilly & South Wales ares. Using the latest techniques from big names in the sector, we have become leaders in the field of Building & Joinery services and products in the Caerphilly Area We are proud of our hard-won reputation for quality workmanship, outstanding customer service and professionalism in South Wales. We are happy to provide advice on your Carpentry & Building projects, and we provide guarantees on all of our work. We have extensive experience in renovating commercial and private properties. We offer a wide range of services for example; General Building & Refurbishment & ...

    published: 09 Apr 2016
  • How to on Logan F3001 Studio Joiner

    http://builderssites.com/ Are you a tradesman who would like a new website that will help you find work locally? Do you want to have your customer reviews online so new customers don’t think twice about hiring you? Do you want somewhere to display all your work photos so your customer can see the high quality of your workmanship? We have packages to suit every type of tradesman both big and small. We can also give your 10% of your choice with promo code BUILDERS10 http://builderssites.com/ We have also handpicked a great selection of power tools from amazon that will that will help you get the job done quicker Combo Kits http://amzn.to/2kOtZgz Drill Drivers http://amzn.to/2lk541f Circular Saws http://amzn.to/2kDkApQ Table Saws http://amzn.to/2ljJIky...

    published: 08 Feb 2017
  • The dancing joiner

    Dancing in work

    published: 20 Jan 2012
  • Joiner in Bolton, J Smith Joinery

    ttps;//www.jsmithjoinery.co.uk joiner in bolton J.Smith Joinery is focused on providing high-quality service and customer satisfaction -- we will do everything we can to meet and exceed your expectations, Our company is based on the belief that our customer's needs are of the utmost importance. Our entire goal is committed to meeting those needs. As a result, a high percentage of our business is from repeat customers and referrals. We would welcome the opportunity to earn your trust and deliver you the best service in the north west, We pride ourselves on low price but high qualiy workmanship which is industry leading, We are also fully insured up to £2,500,000 under a tradesman policy Please visit www.jsmithjoinery.co.uk for more info or call 07530 549 870

    published: 28 Feb 2013
  • How to on Logan F3002 Pro Joiner

    http://builderssites.com/ Are you a tradesman who would like a new website that will help you find work locally? Do you want to have your customer reviews online so new customers don’t think twice about hiring you? Do you want somewhere to display all your work photos so your customer can see the high quality of your workmanship? We have packages to suit every type of tradesman both big and small. We can also give your 10% of your choice with promo code BUILDERS10 http://builderssites.com/ We have also handpicked a great selection of power tools from amazon that will that will help you get the job done quicker Combo Kits http://amzn.to/2kOtZgz Drill Drivers http://amzn.to/2lk541f Circular Saws http://amzn.to/2kDkApQ Table Saws http://amzn.to/2ljJIky...

    published: 08 Feb 2017
  • McNeill Joinery " AT YOUR SERVICE"

    Hi, I am advertising my work on youtube. I am a professional friendly tradesman. I am based in merseyside. If you are interested in my services email me on : mcneilljoinery@yahoo.co.uk, leave your name address and number and i will call back. thank you!!!

    published: 26 Mar 2010
  • What 3 legs can support, a mini workshop

    How to and Style, macduff has brought the 3 leggit knock down saw horse to new levels, that support his Rockwell 4 1/2 tablesaw, router, jigsaw and a multitude of clamping systems on a wee single unit, in fact a portable mini work shop. macduff @ 80 more than he will ever need from now as a hobby. retired tradesman joiner, carpenter and cabinet maker, for 65 years. slainte mhath

    published: 13 Aug 2017
  • Looking for a tradesman?

    Click on http://www.tradesmen.ie/trades to get up to 4 Quotes and Compare Prices from Rated Tradesmen in Your Area. If you are looking for a tradesman in Ireland this video shows how Tradesmen.ie can help. Hre are some more trades that are available below:-, Alarms, Appliance Repairs, Architects, Attic Conversions, BER Assessors, Block layers, Brick layers, Builders, Building Surveyors, Carpenters/Joiners, Carpet fitters, Cavity Insulation, CCTV Cameras, Cleaning Services, Computer Systems, Conservatories/Sunrooms, Curtain makers, Drain & Sewer Cleaning, Electricians, Fencing Contractors, Fitters/Welders, Flooring, Gardeners/Landscapers, Gas Fitters, Ground Works, Gutters Fascia & Soffit, Handyman, Heating Contractors, House Extensions, Insulation Contractors, Interior Designers, Kitch...

    published: 27 Aug 2013
developed with YouTube
How to Use a Jointer | Woodworking

How to Use a Jointer | Woodworking

  • Order:
  • Duration: 6:17
  • Updated: 14 Mar 2013
  • views: 175684
videos
Watch more Learn Woodworking videos: http://www.howcast.com/videos/500358-How-to-Use-a-Jointer-Woodworking Step 1: What is a jointer? Understand what a jointer is: a machine for leveling off pieces of rough wood. Step 2: Locate the high corners Determine the high corners of the planks and mark them--these are the points where you will apply the most pressure to level them out. Tip Use a push pad to apply pressure to the front of the plank and a push stick to apply pressure to the back and to guide the plank along. Step 3: Checking the height difference Before cutting, make sure the difference between the two table heights is where you want it. Also, the fence should be at 90 degrees. Lock all adjustments in place. Repeat the same process with the edges and use an engineer’s square to ensure levelness.
https://wn.com/How_To_Use_A_Jointer_|_Woodworking
S. W. Donnelly Joinery - Cowboy or Tradesman? You Decide.

S. W. Donnelly Joinery - Cowboy or Tradesman? You Decide.

  • Order:
  • Duration: 3:04
  • Updated: 03 Apr 2014
  • views: 133
videos
S.W. Donnelly Joinery - Nercwys, Mold. Found on http://www.findatrade.com. Note, Website do not vet adds! Fraudster or Professional? Note, refunded less than half of his charge & will not issue a receipt.
https://wn.com/S._W._Donnelly_Joinery_Cowboy_Or_Tradesman_You_Decide.
cowboy builder from hell

cowboy builder from hell

  • Order:
  • Duration: 2:09
  • Updated: 13 May 2010
  • views: 52784
videos
This was the work done by Graham Currie and Co. It was a complete and utter mess nothing was right. It was described by one joiner as the worst he had seen in 30 years. It was also condemed by West Lothian Council aho said it was a death trap.
https://wn.com/Cowboy_Builder_From_Hell
Limmy's Vines: The Plasterer

Limmy's Vines: The Plasterer

  • Order:
  • Duration: 2:56
  • Updated: 30 Jan 2014
  • views: 391070
videos
LIMMY'S VINES, the UK & Ireland tour. Tickets on sale NOW. http://bit.ly/limmysvines All your favs on the silver screen, introduced by me, with a big Q&A at the end. See ye there!
https://wn.com/Limmy's_Vines_The_Plasterer
Australia Permanent Residence for TRADE occupations

Australia Permanent Residence for TRADE occupations

  • Order:
  • Duration: 3:56
  • Updated: 08 Jul 2017
  • views: 1020
videos
This video is about some of the trade occupations such as Air conditioning and fridge mechanics, Automotive Electricians, Boat Builders and Shipwrights, Brick layer and stonemason, Cabinet Maker, Carpenter and Joiner, Chef, Child Care Centre Managers, Electrical Engineering Technician, Electricians, Electronics Trades Workers, Glaziers, Horse Trainer, Locksmith, Metal Fitters And Machinists, Motor Mechanics, Painting Trades Workers, Panel Beaters, Plasterers, Plumbers, Radio Communication Technicians,Sheetmetal Trades Workers, Structural Steel And Welding Trades Workers, Technical Cable Jointer, Wall and Floor Tiler which are currently eligibile for a General Skilled Migration especially the 189 visa and also the 190 and 489 Australian Visas. The information in this video is current as of 6 July 2017. Please contact me if you need assistance with Skills Assessment process and need immigration advice. Sujith Billa M: +61411726290 E: sujithtalks@gmail.com MARN: 1791275 Please subscribe to my channel for pristine information on Australian immigration.
https://wn.com/Australia_Permanent_Residence_For_Trade_Occupations
Go to Work With a Tradesman

Go to Work With a Tradesman

  • Order:
  • Duration: 8:10
  • Updated: 31 Oct 2017
  • views: 1404
videos
Here's a short one on my day job. This is footage from this past Saturday and one of the reasons for lack of progress over the weekend. Hope you folks enjoy.
https://wn.com/Go_To_Work_With_A_Tradesman
Making table extensions for a 6 inch jointer

Making table extensions for a 6 inch jointer

  • Order:
  • Duration: 16:50
  • Updated: 03 Dec 2015
  • views: 71653
videos
This was the process I came up with to add extensions to my 6 inch jointer using metal plates. It really helped to joint long boards that otherwise are difficult to do on a 6" jointer. I added them to a 1990s model Jet jointer that I picked up for $150 and refurbished. Thank you for watching, Aaron Weed
https://wn.com/Making_Table_Extensions_For_A_6_Inch_Jointer
The Worlds Campest Tradesmen...

The Worlds Campest Tradesmen...

  • Order:
  • Duration: 0:51
  • Updated: 14 Jun 2017
  • views: 4814
videos
https://wn.com/The_Worlds_Campest_Tradesmen...
Carpenters toolbox

Carpenters toolbox

  • Order:
  • Duration: 5:54
  • Updated: 06 Mar 2017
  • views: 674
videos
This is a copy of the toolbox I made 40 odd years ago as an apprentice joiner. It's not an exact copy as I made a few improvements and dumbed it down from the original as I didn't bother this time with dovetail joints etc.
https://wn.com/Carpenters_Toolbox
Cantrell Construction   Festool Domino Joiners

Cantrell Construction Festool Domino Joiners

  • Order:
  • Duration: 2:50
  • Updated: 18 Sep 2014
  • views: 52
videos
Versatile Products (BOP) Ltd http://www.versatileproducts.co.nz/ For all your paint & equipment needs Looking for paint, abrasives, sprayguns, airbrushes, compressors and tools for your boat, car, tractor, machinery, furniture, kitchen or hobby? You've come to the right place. Tradesman, Home Handyman, Hobbiest - we have the specialised tools, paint and equipment you need to get the job done right. We have over 3,000 quality products, so it is taking time to get them all onto our website. If your desired product isn't listed here, give us a call and our expert team will be able to help.
https://wn.com/Cantrell_Construction_Festool_Domino_Joiners
Joiner Birmingham

Joiner Birmingham

  • Order:
  • Duration: 0:31
  • Updated: 17 Mar 2014
  • views: 4
videos
Need a Birmingham Joiner? http://www.bestlocaltradesmen.com/ How it works 1. Post your job for free 2. Get up to three quotes 3. Review ratings to select your tradesman 4. Rate your tradesman to help others More than 2 million jobs posted. So if you need a Birmingham Joiner visit http://www.bestlocaltradesmen.com/
https://wn.com/Joiner_Birmingham
KD Joinery - Carpenters & Joiners in Motherwell

KD Joinery - Carpenters & Joiners in Motherwell

  • Order:
  • Duration: 1:15
  • Updated: 31 Mar 2010
  • views: 996
videos
KD JOINERY is a family run joinery and carpentry business based in Motherwell serving the Lanarkshire and Glasgow area with the highest quality and standards of joinery and carpentry from fully qualified tradesmen. They undertake every aspect of the joinery trade from small one off maintenance and repair jobs to entire new builds, renovations or convertions. http://www.touchmotherwell.com/business/list/bid/6766290
https://wn.com/Kd_Joinery_Carpenters_Joiners_In_Motherwell
TradeZapp | Social Network *Exclusively* for Tradesmen

TradeZapp | Social Network *Exclusively* for Tradesmen

  • Order:
  • Duration: 1:27
  • Updated: 05 Jun 2017
  • views: 41
videos
Plumbers, Electricians, joiners, carpenters, builders, roofers... all of these and more make up the TradeZapp community, so you can be sure that whatever your trade, you'll always be connected to the right trade. Download TradeZapp for FREE on your App Store today 
https://wn.com/Tradezapp_|_Social_Network_Exclusively_For_Tradesmen
How to on Wood Works 25, Joinery, Part 1

How to on Wood Works 25, Joinery, Part 1

  • Order:
  • Duration: 28:33
  • Updated: 09 Feb 2017
  • views: 4
videos
http://builderssites.com/ Are you a tradesman who would like a new website that will help you find work locally? Do you want to have your customer reviews online so new customers don’t think twice about hiring you? Do you want somewhere to display all your work photos so your customer can see the high quality of your workmanship? We have packages to suit every type of tradesman both big and small. We can also give your 10% of your choice with promo code BUILDERS10 http://builderssites.com/ We have also handpicked a great selection of power tools from amazon that will that will help you get the job done quicker Combo Kits http://amzn.to/2kOtZgz Drill Drivers http://amzn.to/2lk541f Circular Saws http://amzn.to/2kDkApQ Table Saws http://amzn.to/2ljJIky Mitre Saws http://amzn.to/2kDniLS
https://wn.com/How_To_On_Wood_Works_25,_Joinery,_Part_1
Intro to Planer/Jointer

Intro to Planer/Jointer

  • Order:
  • Duration: 6:35
  • Updated: 29 Dec 2011
  • views: 107101
videos
Basic intro to how to square boards on a planer / jointer
https://wn.com/Intro_To_Planer_Jointer
Joinery Depot, Joiner in Hull & Grimsby

Joinery Depot, Joiner in Hull & Grimsby

  • Order:
  • Duration: 0:31
  • Updated: 02 Sep 2014
  • views: 160
videos
For more information go to: http://www.hulldailymail.co.uk/tradesmen/kitchen-design-and-installation/joinery-depot/business-21747665-detail/business.html
https://wn.com/Joinery_Depot,_Joiner_In_Hull_Grimsby
LOCAL JOINERY IN CAERPHILLY - BUILDER & JOINER IN CAERPHILLY

LOCAL JOINERY IN CAERPHILLY - BUILDER & JOINER IN CAERPHILLY

  • Order:
  • Duration: 1:50
  • Updated: 09 Apr 2016
  • views: 147
videos
Welcome to Your Local Carpentry - Joinery - Building Services Latest project supply & install new hardwood staircase in Caerphilly South Wales We are a well-established Building & Joinery firm in Caerphilly & South Wales ares. Using the latest techniques from big names in the sector, we have become leaders in the field of Building & Joinery services and products in the Caerphilly Area We are proud of our hard-won reputation for quality workmanship, outstanding customer service and professionalism in South Wales. We are happy to provide advice on your Carpentry & Building projects, and we provide guarantees on all of our work. We have extensive experience in renovating commercial and private properties. We offer a wide range of services for example; General Building & Refurbishment & purpose Made Joinery & carpentry. If you’re not sure where to turn give us a call we’re happy to help. We have good relationships with other local tradespeople and can advise you on your project from start to finish working alongside other trade professionals. You can text or call us on 07976 741 770 or whatsapp — viber — LineFacebookGoogle+ — Twitter
https://wn.com/Local_Joinery_In_Caerphilly_Builder_Joiner_In_Caerphilly
How to on Logan F3001 Studio Joiner

How to on Logan F3001 Studio Joiner

  • Order:
  • Duration: 5:21
  • Updated: 08 Feb 2017
  • views: 5
videos
http://builderssites.com/ Are you a tradesman who would like a new website that will help you find work locally? Do you want to have your customer reviews online so new customers don’t think twice about hiring you? Do you want somewhere to display all your work photos so your customer can see the high quality of your workmanship? We have packages to suit every type of tradesman both big and small. We can also give your 10% of your choice with promo code BUILDERS10 http://builderssites.com/ We have also handpicked a great selection of power tools from amazon that will that will help you get the job done quicker Combo Kits http://amzn.to/2kOtZgz Drill Drivers http://amzn.to/2lk541f Circular Saws http://amzn.to/2kDkApQ Table Saws http://amzn.to/2ljJIky Mitre Saws http://amzn.to/2kDniLS
https://wn.com/How_To_On_Logan_F3001_Studio_Joiner
The dancing joiner

The dancing joiner

  • Order:
  • Duration: 2:04
  • Updated: 20 Jan 2012
  • views: 228
videos
Dancing in work
https://wn.com/The_Dancing_Joiner
Joiner in Bolton, J Smith Joinery

Joiner in Bolton, J Smith Joinery

  • Order:
  • Duration: 3:59
  • Updated: 28 Feb 2013
  • views: 65
videos
ttps;//www.jsmithjoinery.co.uk joiner in bolton J.Smith Joinery is focused on providing high-quality service and customer satisfaction -- we will do everything we can to meet and exceed your expectations, Our company is based on the belief that our customer's needs are of the utmost importance. Our entire goal is committed to meeting those needs. As a result, a high percentage of our business is from repeat customers and referrals. We would welcome the opportunity to earn your trust and deliver you the best service in the north west, We pride ourselves on low price but high qualiy workmanship which is industry leading, We are also fully insured up to £2,500,000 under a tradesman policy Please visit www.jsmithjoinery.co.uk for more info or call 07530 549 870
https://wn.com/Joiner_In_Bolton,_J_Smith_Joinery
How to on Logan F3002 Pro Joiner

How to on Logan F3002 Pro Joiner

  • Order:
  • Duration: 5:13
  • Updated: 08 Feb 2017
  • views: 8
videos
http://builderssites.com/ Are you a tradesman who would like a new website that will help you find work locally? Do you want to have your customer reviews online so new customers don’t think twice about hiring you? Do you want somewhere to display all your work photos so your customer can see the high quality of your workmanship? We have packages to suit every type of tradesman both big and small. We can also give your 10% of your choice with promo code BUILDERS10 http://builderssites.com/ We have also handpicked a great selection of power tools from amazon that will that will help you get the job done quicker Combo Kits http://amzn.to/2kOtZgz Drill Drivers http://amzn.to/2lk541f Circular Saws http://amzn.to/2kDkApQ Table Saws http://amzn.to/2ljJIky Mitre Saws http://amzn.to/2kDniLS
https://wn.com/How_To_On_Logan_F3002_Pro_Joiner
McNeill Joinery " AT YOUR SERVICE"

McNeill Joinery " AT YOUR SERVICE"

  • Order:
  • Duration: 0:16
  • Updated: 26 Mar 2010
  • views: 51
videos
Hi, I am advertising my work on youtube. I am a professional friendly tradesman. I am based in merseyside. If you are interested in my services email me on : mcneilljoinery@yahoo.co.uk, leave your name address and number and i will call back. thank you!!!
https://wn.com/Mcneill_Joinery_At_Your_Service
What 3 legs can support, a mini workshop

What 3 legs can support, a mini workshop

  • Order:
  • Duration: 6:17
  • Updated: 13 Aug 2017
  • views: 3298
videos
How to and Style, macduff has brought the 3 leggit knock down saw horse to new levels, that support his Rockwell 4 1/2 tablesaw, router, jigsaw and a multitude of clamping systems on a wee single unit, in fact a portable mini work shop. macduff @ 80 more than he will ever need from now as a hobby. retired tradesman joiner, carpenter and cabinet maker, for 65 years. slainte mhath
https://wn.com/What_3_Legs_Can_Support,_A_Mini_Workshop
Looking for a tradesman?

Looking for a tradesman?

  • Order:
  • Duration: 1:31
  • Updated: 27 Aug 2013
  • views: 365971
videos
Click on http://www.tradesmen.ie/trades to get up to 4 Quotes and Compare Prices from Rated Tradesmen in Your Area. If you are looking for a tradesman in Ireland this video shows how Tradesmen.ie can help. Hre are some more trades that are available below:-, Alarms, Appliance Repairs, Architects, Attic Conversions, BER Assessors, Block layers, Brick layers, Builders, Building Surveyors, Carpenters/Joiners, Carpet fitters, Cavity Insulation, CCTV Cameras, Cleaning Services, Computer Systems, Conservatories/Sunrooms, Curtain makers, Drain & Sewer Cleaning, Electricians, Fencing Contractors, Fitters/Welders, Flooring, Gardeners/Landscapers, Gas Fitters, Ground Works, Gutters Fascia & Soffit, Handyman, Heating Contractors, House Extensions, Insulation Contractors, Interior Designers, Kitchens & Fitted Furniture, Locksmiths , Mechanics, New Builds, Painters/Decorators, Paving, Phone Systems, plumbers, plasterers, Quantity Surveyors, Removal & Storage, Roofers, Slabbing Contractors, Solar Panels, Steel Erectors, Stone Masons, Tilers, Tree Surgeons, Underfloor Heating, Upholsterers, Window Cleaners, Window Repairs, window installers The service is available throughout Ireland and as well as Dublin here are more counties where you can request a quote below:- Carlow, Cavan, Clare, Cork, Donegal, Galway, Kerry, Kildare, Kilkenny, Laois, Leitrim, Limerick, Longford, Louth, Mayo, Meath, Monaghan, Offaly, Roscommon, Sligo, Tipperary, Waterford, Westmeath, Wexford, Wicklow Click on http://www.tradesmen.ie/register.asp to register as a tradesman. or Click on http://www.tradesmen.ie/trades to get up to 4 Quotes and Compare Prices from Rated Tradesmen in Your Area.
https://wn.com/Looking_For_A_Tradesman
×